Looking for thermal simulation simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 4

Analysis of the thermal comfort in Pantheon.
1st study: Incompressible external flow simulation to find the air exchange rate
2nd study: Internal convection simulation inside the building

This is a conjugate heat transfer study in an electronics cooling project. With respect to the incoming air flow through the enclosed tunnel on the circular pin type heat sink design, and maximum component temperature, maximum power limit for the component was calculated.

The goal is to investigate several case studies in automotive components. This includes:
- mechanical stress simulations
- thermal simulations
- CFD simulations

CFD analysis of airflow within an apartment.

Thermal simulation on a geometry imported from onshape CAD directly.

In this project, steady state thermal analysis of a CFL light bulb is performed.

Examine the distribution of heat in a copper plate

To analyse the cooling and heat effect of the module at different temperatures

Design of a cast aluminum heatsink for a 100W computer CPU

A 2 stage thermoelectric cooler with water jacket.

(12x) Laird PC12,139,F1,3550,TA,W6 peltier devices, 9 in first stage, 3 in second stage.  
(1x) AAVID 416101U00000G chilled water cold plate.

Passive and Active convection cooling of a Raspberry Pi mother board design .

analysis of heat distribution in an e3d-v6 hot-end

heat simulation showing the airflow in a tv table, with only one hole for air outlet.

Preliminary prototype simulations for use in TEG power supply system.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.
You can find the tutorial for this project here: https://www.simscale.com/docs/tutorials/conjugate-heat-transfer-cooling-of-electronic-sink/

Convective Heat Transfer application for room heating.

This project is part of session 1 of the Air Conditioning and Ventilation webinar. It shows how the cooling of a Data center room can be simulated using SimScale.

This project analysis the cooling of a PCB board via CHT

Air Conditioning and Ventilation Webinar Session3 - Transient simulation for heating of a living room

CHT simulation of heat sink with temperature source

In this project a thermal analysis of a laser beam welding (LBW) was performed.

In this project a transient thermal analysis of a perforated plate with is demonstrated.

This project performs a heat transfer analysis of a sphere under convection.

This project simulates convective flow inside a Light Bulb.

Analysis of the thermal stresses generated by thermal expansion - contraction differences between an aluminum housing and steel bearings

thermal analysis of resistor in  fixed environment. Originally my  project  A fischer modified the geometry slightly, adding connections and used volume heat source bcs.  

2 thermistors adjacent to UUT TEST thermal analysis

thermal simulation | SimScale Project Library | Page 4